Day 15 - Thinning the soundboard and finish building the lattice

I thinned the soundboard to 2.7mm.

I finished cutting the grooves to fit the lattice pieces together.

I glued the lattice pieces together.

I marked the lattice with chalk.

I sanded the chalk away until it was all clear, meaning that the edges were smooth and matched the radius of the 25-foot radiused sanding board.

I marked the dimensions for the strengthening piece for the sound hole.

I cut the inside hole on the drill press.

I roughly cut the outside on the band saw.

I finished the outside of the strengthening piece on the disk sander.

I marked the edges of the guitar on the soundboard as well as the inside border of the kerfing.