I carved the neck further back to allow for easier access to the upper frets.
I filed a bevel into the edges of the frets.
I filed the tops of the frets with a 20 inch radiused sanding block to make all the frets sit at an even height.
I started cutting the heel down, ready to attach the heel cap.
I sanded the bevel on the headstock to make it cleaner.
I filed the edges of the frets to make them sit flush with the edge of the fretboard.
I filed a bevel into the edges of the frets.
I filed the tops of the frets with a 20 inch radiused sanding block to make all the frets sit at an even height.
I started cutting the heel down, ready to attach the heel cap.
No comments:
Post a Comment