Day 25 - Cutting the dovetail joint and repairing the rosette.

I marked the center of the soundboard

I fitted the body into the dovetail cutting jig.

I routed down to 15mm deep.

I changed router bits to cut the outward angle.

I fitted the neck into the dovetail cutting jig.

I routed to 13mm deep.

I changed blades to cut the outward angle.

Some of the outer perfling surrounding my rosette had come apart when the soundboard was being thinned. 

I made a circular piece to fit into the soundhole to create an anchor point for the dremmel. 

I used the dremmel to route into the existing perfling.

I fitted new perfling into the routed channel.