The guitar has been lacquered to a high gloss finish.
I measured the position for the bridge and marked it with tape.
I rubbed the bridge with steel wool to give it a satin finish.
I scored the lacquer around the bridge.
I removed the lacquer from the area where the bridge will go.
I made cauls for the bridge.
I clamped the bridge to the soundboard using the bridge caul that i had made previously for under the soundboard as well as the top bridge cauls.
I filed the edges of the fretboard so as to cause a break along the lacquer. This prevents the lacquer from chipping when i remove the tape.
I removed the excess lacquer from the fretboard with a scalpel.
I measured the position for the bridge and marked it with tape.
I rubbed the bridge with steel wool to give it a satin finish.
I scored the lacquer around the bridge.
I removed the lacquer from the area where the bridge will go.
I made cauls for the bridge.
I clamped the bridge to the soundboard using the bridge caul that i had made previously for under the soundboard as well as the top bridge cauls.
No comments:
Post a Comment